| "B" COLLET ADAPTER |
- Adapts Guns that accept Euro/Soyer Style Collets to Accept “B” Collets
- Perfect for Insulation Pin Applications
| $23.10 | |
| "B" COLLET PROTECTOR |
- “B” Collet Protector
- For Use with Insulation Pins
- Available for 10 ga, 12 ga, and 14 ga Insulation Pins
| $11.00 – $27.50 | |
| 1"-8 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $374.85 – $760.73 | |
| 1"-8 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $374.85 – $760.73 | |
| 1/2-13" MILD STEEL FULL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $118.61 – $393.75 | |
| 1/2-13" MILD STEEL PARTIAL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $88.64 – $136.71 | |
| 1/2-13" STAINLESS STEEL FULL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $156.45 – $375.00 | |
| 1/2-13" STAINLESS STEEL PARTIAL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $164.27 – $395.61 | |
| 1/2" DBA - DEFORMED BAR ANCHORS |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $132.64 – $719.77 | |
| 1/4-20 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $47.85 – $72.32 | |
| 1/4-20 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrules are recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $47.85 – $72.32 | |
| 1/4-20 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $78.82 – $137.37 | |
| 1/4-20 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrules are recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $51.96 – $137.37 | |
| 3/4-10" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $150.94 – $330.75 | |
| 3/4-10" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $150.94 – $330.75 | |
| 3/4-10" STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $367.46 – $947.82 | |
| 3/4-10" STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $367.47 – $947.82 | |
| 3/4" DBA - (DEFORMED BAR ANCHORS) |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $166.42 – $749.04 | |
| 3/8" DBA - DEFORMED BAR ANCHORS |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $125.50 – $492.69 | |
| 3/8"-16 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required
| $67.47 – $110.47 | |
| 3/8"-16 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $67.47 – $110.47 | |
| 3/8"-16 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $115.22 – $243.77 | |
| 3/8"-16 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $115.22 – $243.77 | |
| 4/0 WELD CABLE LUGS |
- 4/0 Weld Cable Lugs with 1/2″ hole for Heavy Duty Stud Welding Applications. Tinned Copper.
| $5.50 – $11.00 | |
| 5/16-18 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $64.72 – $103.41 | |
| 5/16-18 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $64.72 – $103.41 | |
| 5/16-18 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $95.48 – $196.69 | |
| 5/16-18 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $95.48 – $196.69 | |
| 5/8-11" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $114.88 – $235.16 | |
| 5/8-11" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $114.88 – $235.16 | |
| 5/8-11" STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $237.92 – $600.98 | |
| 5/8-11" STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $237.92 – $600.98 | |
| 5/8-11" STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| | |
| 5/8" DEFORMED BAR (DBA) |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $9.91 – $396.41 | |
| 7/8-9" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $242.55 – $683.55 | |
| 7/8-9" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $242.55 – $683.55 | |
| ACE-P100 CAPACITOR DISCHARGE PIN WELDER | The ACE-P100 incorporates the latest technology into a compact, rugged, and portable CD pin welder. With an up-dated user interface and new system design, this unit has the capacity to weld pins up to 10-gauge and CD studs up to #10 FASTER THAN EVER.
| $2,310.00 | |
| CD Weld Studs | Description Sold in Quantities of 100 each. Flanged Capacitor Discharge (CD) Studs Available in the … | | |
| CHUCK - BENT STUD |
| $161.53 | |
| CHUCK - EXTRA LONG ADJUSTABLE |
- Extra Long Adjustable Chuck
| $46.20 – $107.80 | |
| CHUCK - MAGNETIC |
| $27.50 – $99.00 | |
| CHUCK - MALE |
| $47.19 | |
| CHUCK - Y ANCHOR CHUCK |
| $75.90 | |
| COLLET - NELSON STYLE |
| $22.00 – $30.80 | |
| COLLET - SOYER |
- Collet for CD Welding with adjustable stop.
- Fits Tru-Weld Equipment and HBS CD Welding Guns.
- Call us if you are unsure of which collet you need! 1-800-936-1948
- Dimensions: .390″ OD x 1.781″ Long
This is our preferred collet. Unlike the “B” Collet where you must use a “Stop” so the stud doesn’t slide all the way through your collet, the Soyer or Euro Collet has an adjustable stop. So, no matter what length stud you are shooting, you can adjust the collet accordingly.
| $29.00 – $36.00 | |
| COLLET "B" STOP |
| $6.60 | |
| COLLET INSERTS |
| $20.90 | |
| COLLETS - "B" |
- “B” Collet for CD Stud Welding.
- Standard B Collets are 3/8″ x 1-3/8″ long
- AGM Style Collets are 3/8″ x 1-3/16″ long
- Requires Stop if shooting Threaded CD Studs.
Call us at (800) 936-1948 if you are unsure what type of collet you require.
| $14.00 – $18.00 | |
| DEFORMED BAR ANCHOR (DBA) ELEVATION LOCATOR TOOL |
- Adjustable to allow DBA to be accurately installed at the correct vertical location on bent plate/pour stop
- Dramatically speeds the installation of DBA, especially with 24″ plus long DBA
- Reduces Installer Fatigue
- Essential for 36″ and longer DBA
| $79.20 | |
| EXTENSION BAR |
- Range of Stud or Deformed Bar Anchor (DBA) length listed assumes the use of 18″ legs
- Aluminum Extension Bars for Stud or DBA
| $20.90 – $79.20 | |
| FEMALE PANEL MOUNT CAM-LOK CONNECTORS |
- Female Panel Mount Cam-lok Connectors
| $52.80 | |
| FERRULE GRIP - HEAVY DUTY |
- Ferrule Grip – Heavy Duty
| $37.40 | |
| FERRULE GRIP - LONG CLOSED (2" LONG) |
- Long Closed Ferrule Grip (2″ Long)
- Usually Required to Install Threaded Studs to the Inside of an Angle
| $12.10 – $36.08 | |
| FERRULE GRIP - LONG SPLIT (2" LONG) |
- Long Split Ferrule Grip (2″ Long)
| $12.10 – $15.40 | |
| FERRULE GRIP - SPLIT |
- Split Ferrule Grip – Brass
| $11.00 – $26.40 | |
| FERRULE GRIPS - CLOSED |
- Closed Ferrule Grip – Brass
| $7.70 – $15.40 | |
| FERRULE TUBE BUSHING |
| $15.40 | |
| FERRULE TUBING |
| $132.00 | |
| FOOT PIECE - SPLIT & CLOSED BI-POD FEET |
- Foot Piece – Split & Closed Bi-Pod Feet
| $86.90 | |
| FOOT PIECE - STANDARD CLOSED & STANDARD SPLIT FEET 1/8" THRU 1" |
- Foot Piece – Standard Closed & Standard Split Feet
| $31.90 – $40.70 | |
| FOOT PLATE - SINGLE FERRULE |
- Foot Plate – Single Ferrule
| $40.70 | |
| FOOT PLATE - TWIN LEG FERRULE FOOT PLATE |
- Foot Plate – Twin Leg Ferrule Foot Plate
| $36.30 | |
| Headed Concrete Anchors | 1/4″ Headed Concrete Anchors are most commonly used on embed plates and for many other concrete connections. … | | |
| Headed Shear Connector | 3/4″ Description Unit of measure is Box except for 12″ lengths and up. For quantity … | | |
| HUBBELL STYLE CONNECTORS |
- Hubbell Style Connectors
- 2-wire Male and Female
| $22.00 – $55.00 | |
| LEGS - ARC STUD WELDING LEGS | ARC Stud Welding Legs 5/16″ Diameter part numbers: L-031-Length 3/8″ Diameter part numbers: L-037-Length | $31.45 – $117.36 | |
| LEGS WASHERS AND SCREWS |
- Legs Washers and Screws
- 5/16″ Diameter part numbers: L-031-Screw or washer
- 3/8″ Diameter part numbers: L-037-Screw or washer
| $5.45 – $12.10 | |
| LONG ADJUSTABLE |
- Extra Long Adjustable Chuck
| $46.20 – $107.80 | |
| NELSON STOP | The Nelson Style Stop comes in 4 Stud Lengths
- 1/8″ to 5/8″
- 3/4″ to 1-1/8″
- 1-1/4″ to 1-5/8″
- 1-3/4″ to 2-1/8″
| $9.35 – $15.40 | |
| PHOENIX CONNECTORS 4 WIRE |
- Phoenix Connectors
- For 4 Wire Systems
| $46.20 | |
| R&S CONTROL CABLE CONNECTORS 4 WIRE |
- R&S Control Cable Connectors
- 4 Wire
- No Longer Manufactured. Subject to Stock Availability
- See Phoenix Connectors to Update Your Cables
| $162.80 | |
| SJ-205-T4 MOBILE STUD WELDING GENERATOR SYSTEM |
- SJ-205-T4 (Tier 4) Mobile Stud Welding Generator System
- 205 kw Generator System
- TW6900 Single Gun or TW6902 Dual Gun Stud Welder
- 1 or 2 Heavy Duty Stud Welding Guns with Thru-Deck Accessories
- 2 ea 50′ Ground Cables
- 300′ of Combo Cable (Lead Cable)
- For Delivery Within 500 Miles Add $1.25/Mile. Over 500 Miles, Ask For Shipping Options.
Our jobsite division uses this genset every day in the field. If you are going to buy one, why not buy from the experts?!
Watch the Demonstration Video
| $153,000.00 – $165,500.00 | |
| SPARK SHIELD - STANDARD |
| $17.60 | |
| SPARK SHIELD - VENTED |
| $17.60 | |
| STUD GUN - HEAVY DUTY |
- A Service Rep will contact you after you place your order to ensure the gun is set up for your welder and your application.
- Ergonomic Design
- Welding Range – 1/8″ thru 1 1/4″ Diameter Studs
- 5.2 lbs Excluding Weld Cable
- Configured to Operate with your Stud Welder.
The TWE 17000 by Tru-Weld Equipment has been designed to fit comfortably for all hands, including when wearing a work glove. The neck of the handle has been tapered so that when grasped, the trigger can be accessed easily, without any unnecessary strain. The handle length allows for better balance of the stud gun and it keeps the welding cable and connector away from your hand, minimizing operator fatigue.
The TWE17000 heavy duty stud gun has a welding range from 1/8” through 1-1/4” diameter studs.
The TWE17000 is approximately 10.0″ long from the weld cable to the back cap, and approximately 7″ long from the top of the stud gun to the bottom of the handle. The overall weight of the gun is approximately 5.2 lbs., excluding 8.5 feet of 4/0 weld cable and 8 feet of control cable (this also excludes all connectors, legs, and foot piece).
The TWE17000 can be ordered to operate with any type of stud welding equipment. Simply specify the make and model of your equipment and we will provide you with a stud gun connection that is compatible with your unit, regardless of the manufacturer.
| $2,780.00 | |
| TAPERED CHUCK ADAPTER- 033-505 |
- Tapered Chuck Adapter
- Connects a Standard Adjustable Chuck or Tapered Headed Chuck to your Heavy Duty Stud Guns or stud guns with a Threaded Connector Stud.
- Pt # 033-505
| $24.20 | |
| TEMPLATE TUBE ADAPTER | Template Tube Adapter
| $213.40 | |
| TW4300 Drawn ARC Stud Welder - 1/2" Max Stud Diameter |
- Adjustable weld time, weld current, gas purge time for a wide range of process control.
- Supervisor lockout by key so settings isn’t changed.
- Great short cycle performance on thick and thin base materials.
- Two-handle lift for practical portability.
- Stud Job Counter that can be reset for every job.
- The TW4300 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding. The TW4300 contains digital controls for weld time, weld current, and gas purge time. The system was designed to be a perfect fit for shop and shipboard use, welding up to 1/2″ studs. This is all contained in a compact, portable package.
TW4300 Manual
Included with Complete System:
800 Amp Power Supply Controller, TWE19000 Light Duty stud gun, 25 feet of #1 AWG combo cable, and 15 feet of #1 AWG ground cable with clamp.A17
| $9,790.00 | |
| TW4400 Drawn ARC Stud Welder - 5/8" Max Stud Diameter | The TW4400 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding processes. The TW4400 contains digital controls for weld time, weld current, and gas purge time. The system was designed to be an ideal fit for shop use, weld up to 5/8″ diameter threaded studs. This is all contained in a compact, portable package.
NEW PRO-TECH’D technology protects the gun circuitry
NEW Improved user interface for more intuitive setup
NEW Factory presets and user customizable presets
NEW Improved weld control
TW4400 Manual
TW4400 Fyler
Features/Included
- TW4400 Power supply, TWE19000 Light-Duty stud gun, 25 feet of #1AWG combo cable and 15 feet of #1AWG ground cable with clamp
TW4400 Specifications
Size/Dimension:
Height 12.6” (320mm)
Width 11” (280mm)
Length 22.4″ (570mm)
Weld Range:
1/8″ to 5/8″ diameter
Duty Cycle:
1/8” through 1/4″ – unlimited
3/8″ – 7 to 8 per minute
1/2″ – 4 to 5 per minute
5/8″ – 2 to 3 per minute
Input Voltage:
230 / 460 VAC 3 Phase 60Hz
Fusing Requirement:
(slow acting) 230/50 Amps
460/25 Amps
| $10,500.00 | |
| TW5600 DRAWN ARC STUD WELDER- 3/4" MAX STUD DIAMETER |
- TW5600 Stud Welding System – Fully-Integrated Shop Stud Welding System
- (3/4” Max Stud Diameter)
TW5600 Manual
Included with Complete System:
- 1600 Amp Power supply Controller
- TWE17000 Heavy Duty stud gun
- 35 feet of 4/0 weld and control cable and 25 feet of 4/0 ground cable w/ HD clamp
- The TW5600 is a fully integrated stud welding system with two digital controls for time and current. The system was designed to be a perfect fit for shop use, excelling at small to medium/large diameter studs. This is all contained in a compact, affordable package.
| $12,500.00 – $14,790.00 | |
| TW5700 DRAWN ARC STUD WELDER - 7/8" MAX STUD DIAMETER |
- TW5700 Stud Welding System – Fully-Integrated Shop Stud Welding System
- (7/8” Max Stud Diameter)
TW5700 Manual
Included with Complete System:
- 1900 Amp Power supply Controller
- TWE17000 Heavy Duty stud gun
- 50 feet of 4/0 weld and control cable
- 25 feet of 4/0 ground cable w/ HD clamp
- The TW5700 is a fully integrated stud welding system with two digital controls for time and current. The system was designed to be a perfect fit for shop use, excelling at small to large diameter studs. This is all contained in a compact, affordable package.
| $13,715.00 – $16,000.00 | |
| TW6800 - 1" MAX STUD DIAMETER |
- TW6800 Single Gun Stud Welding System
- Heavy Duty Steel-Fabrication Shop Stud Welding System
- (1/4″ – 1″ Diameter)
TW6800 Manual
Included with Complete System:
- Power supply controller, one (1) TWE17000 heavy duty stud gun, one (1) set of 50ft of 4/0 weld and control cable, and one 25ft of 4/0 ground cable w/ HD clamp.
- The TW6800 is a fully integrated single-gun stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs.
| $17,150.00 – $19,450.00 | |
| TW6802 - DUAL GUN - 1" MAX STUD DIAMETER |
- TW6802 Dual-Gun Stud Welding System
- Heavy Duty Steel-Fabrication Shop Stud Welding System
- (1/4″ – 1″ Diameter)
TW6802 Manual
Included:
- Power supply controller, two (2) TWE17000 heavy duty stud guns, two (2) sets of 50ft of 4/0 weld and control cable, and two (2) sets of 25ft of 4/0 ground cable w/ HD clamp.
- The TW6802 is a fully integrated dual-gun stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs.
| $19,970.00 – $24,700.00 | |
| TW6900- 1 1/4" MAX STUD DIAMETER |
- TW6900 Stud Welding System
- (1 1/4” Max Stud Diameter)
TW6900 Manual
Included:
- 3000 amp power supply. Complete System Includes one (1) TWE17000 Heavy Duty stud guns, 150′ of 4/0 Combo Cables and two (2) 50′ 4/0 ground cables w/ HD clamps.
- The TW6900 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications (this also includes G90 decking.)
| $19,890.00 – $22,100.00 | |
| TW6902 - DUAL GUN - 1 1/4" MAX STUD DIAMETER |
- Smooth arc curve allows for the wide range of welding.
- Enhanced duty cycle for production requirements.
- Powerful output for even the largest diameter jobs.
- Stepless time and current control allow for infinite settings for fine tuning the welding output.
- Safety welding interlock. Keeps system from double triggering and saves on chuck wear.
- Stud Job counter which can be reset per job.
TW6902 Manual
Dimensions:
- Height 28” (736.6mm)
- Width 29” (711.2mm)
- Length 36” (914.4mm)
- Weight 865 lbs (398Kg)
Weld Range:
- 1/4” to 1-1/4” diameter
- Duty Cycle:
- 1/4” through 5/8″ – unlimited
- 3/4″ – 22 to 24 per minute
- 7/8” – 16 to 18 per minute
- 1” – 12 to 14 per minute
- 1-1/4” – 4 to 5 per minute
Included with Complete System:
- 3000 amp power supply.
- Two (2) TWE17000 Heavy Duty stud guns.
- 300′ of 4/0 Combo Cables.
- Two (2) 50′ 4/0 ground cables w/ HD clamps.
The TW6902 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications.
| $23,290.00 – $27,950.00 | |
| TWI-250 - 1/4" CAPACITY |
- TWi-250: 1/4″ Capacitor Discharge System
The TW-i series of capacitor discharge stud welders incorporates the latest solid state technology into a compact, light-weight, and rugged CD stud welder. This full line of equipment is capable of welding pins, cup head pins, and CD studs ranging from 14-gauge up to 3/8” full-flanged stainless steel studs.
| $2,890.00 | |
| TWI-250CP - 1/4" CAPACITY (BEST CHOICE FOR CUPHEAD PINS) |
The TW-i series of capacitor discharge stud welders incorporates the latest solid state technology into a compact, light-weight, and rugged CD stud welder. This full line of equipment is capable of welding pins, cup head pins, and CD studs ranging from 14-gauge up to 3/8” full-flanged stainless steel studs.
| $3,100.00 | |
| TWI-321 - 5/16" CAPACITY | The TW-i series of capacitor discharge stud welders incorporates the latest solid state technology into a compact, light-weight, and rugged CD stud welder. This full line of equipment is capable of welding pins, cup head pins, and CD studs ranging from 14-gauge up to 3/8” full-flanged stainless steel studs.
| $3,550.00 | |
| TWI-375 - 3/8" CAPACITY | The TW-i series of capacitor discharge stud welders incorporates the latest solid state technology into a compact, light-weight, and rugged CD stud welder. This full line of equipment is capable of welding pins, cup head pins, and CD studs ranging from 14-gauge up to 3/8” full-flanged stainless steel studs.
| $4,660.00 | |