| 4/0 WELD CABLE LUGS | - 4/0 Weld Cable Lugs with 1/2″ hole for Heavy Duty Stud Welding Applications. Tinned Copper.
| $5.50 – $11.00 | |
| CHUCK - BENT STUD | | $161.53 | |
| CHUCK - EXTRA LONG ADJUSTABLE | - Extra Long Adjustable Chuck
| $46.20 – $107.80 | |
| CHUCK - MALE | | $47.19 | |
| CHUCK - Y ANCHOR CHUCK | | $75.90 | |
| DEFORMED BAR ANCHOR (DBA) ELEVATION LOCATOR TOOL | - Adjustable to allow DBA to be accurately installed at the correct vertical location on bent plate/pour stop
- Dramatically speeds the installation of DBA, especially with 24″ plus long DBA
- Reduces Installer Fatigue
- Essential for 36″ and longer DBA
| $79.20 | |
| EXTENSION BAR | - Range of Stud or Deformed Bar Anchor (DBA) length listed assumes the use of 18″ legs
- Aluminum Extension Bars for Stud or DBA
| $20.90 – $79.20 | |
| FEMALE PANEL MOUNT CAM-LOK CONNECTORS | - Female Panel Mount Cam-lok Connectors
| $52.80 | |
| FERRULE GRIP - HEAVY DUTY | - Ferrule Grip – Heavy Duty
| $37.40 | |
| FERRULE GRIP - LONG CLOSED (2" LONG) | - Long Closed Ferrule Grip (2″ Long)
- Usually Required to Install Threaded Studs to the Inside of an Angle
| $12.10 – $36.08 | |
| FERRULE GRIP - LONG SPLIT (2" LONG) | - Long Split Ferrule Grip (2″ Long)
| $12.10 – $15.40 | |
| FERRULE GRIP - SPLIT | - Split Ferrule Grip – Brass
| $11.00 – $26.40 | |
| FERRULE GRIPS - CLOSED | - Closed Ferrule Grip – Brass
| $7.70 – $15.40 | |
| FERRULE TUBE BUSHING | | $15.40 | |
| FERRULE TUBING | | $132.00 | |
| FOOT PIECE - SPLIT & CLOSED BI-POD FEET | - Foot Piece – Split & Closed Bi-Pod Feet
| $86.90 | |
| FOOT PIECE - STANDARD CLOSED & STANDARD SPLIT FEET 1/8" THRU 1" | - Foot Piece – Standard Closed & Standard Split Feet
| $31.90 – $40.70 | |
| FOOT PLATE - SINGLE FERRULE | - Foot Plate – Single Ferrule
| $40.70 | |
| FOOT PLATE - TWIN LEG FERRULE FOOT PLATE | - Foot Plate – Twin Leg Ferrule Foot Plate
| $36.30 | |
| HUBBELL STYLE CONNECTORS | - Hubbell Style Connectors
- 2-wire Male and Female
| $22.00 – $55.00 | |
| LEGS WASHERS AND SCREWS | - Legs Washers and Screws
- 5/16″ Diameter part numbers: L-031-Screw or washer
- 3/8″ Diameter part numbers: L-037-Screw or washer
| $5.45 – $12.10 | |
| LONG ADJUSTABLE | - Extra Long Adjustable Chuck
| $46.20 – $107.80 | |
| PHOENIX CONNECTORS 4 WIRE | - Phoenix Connectors
- For 4 Wire Systems
| $46.20 | |
| R&S CONTROL CABLE CONNECTORS 4 WIRE | - R&S Control Cable Connectors
- 4 Wire
- No Longer Manufactured. Subject to Stock Availability
- See Phoenix Connectors to Update Your Cables
| $162.80 | Out of stock |
| TAPERED CHUCK ADAPTER- 033-505 | - Tapered Chuck Adapter
- Connects a Standard Adjustable Chuck or Tapered Headed Chuck to your Heavy Duty Stud Guns or stud guns with a Threaded Connector Stud.
- Pt # 033-505
| $24.20 | |
| TW6902 - DUAL GUN - 1 1/4" MAX STUD DIAMETER | - Smooth arc curve allows for the wide range of welding.
- Enhanced duty cycle for production requirements.
- Powerful output for even the largest diameter jobs.
- Stepless time and current control allow for infinite settings for fine tuning the welding output.
- Safety welding interlock. Keeps system from double triggering and saves on chuck wear.
- Stud Job counter which can be reset per job.
TW6902 Manual Dimensions: - Height 28” (736.6mm)
- Width 29” (711.2mm)
- Length 36” (914.4mm)
- Weight 865 lbs (398Kg)
Weld Range: - 1/4” to 1-1/4” diameter
- Duty Cycle:
- 1/4” through 5/8″ – unlimited
- 3/4″ – 22 to 24 per minute
- 7/8” – 16 to 18 per minute
- 1” – 12 to 14 per minute
- 1-1/4” – 4 to 5 per minute
Included with Complete System: - 3000 amp power supply.
- Two (2) TWE17000 Heavy Duty stud guns.
- 300′ of 4/0 Combo Cables.
- Two (2) 50′ 4/0 ground cables w/ HD clamps.
The TW6902 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications. | $23,290.00 – $27,950.00 | |