| 1"-8 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $374.85 – $760.73 | |
| 1"-8 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $374.85 – $760.73 | |
| 1/2-13" MILD STEEL FULL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $118.61 – $393.75 | |
| 1/2-13" MILD STEEL PARTIAL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $88.64 – $136.71 | |
| 1/2-13" STAINLESS STEEL FULL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $156.45 – $375.00 | |
| 1/2-13" STAINLESS STEEL PARTIAL THREAD ARC STUDS |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $164.27 – $395.61 | |
| 1/2" DBA - DEFORMED BAR ANCHORS |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $132.64 – $719.77 | |
| 1/4-20 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $47.85 – $72.32 | |
| 1/4-20 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrules are recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $47.85 – $72.32 | |
| 1/4-20 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $78.82 – $137.37 | |
| 1/4-20 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrules are recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $51.96 – $137.37 | |
| 3/4-10" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $150.94 – $330.75 | |
| 3/4-10" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $150.94 – $330.75 | |
| 3/4-10" STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $367.46 – $947.82 | |
| 3/4-10" STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $367.47 – $947.82 | |
| 3/4" DBA - (DEFORMED BAR ANCHORS) |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $166.42 – $749.04 | |
| 3/8" DBA - DEFORMED BAR ANCHORS |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $125.50 – $492.69 | |
| 3/8"-16 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required
| $67.47 – $110.47 | |
| 3/8"-16 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $67.47 – $110.47 | |
| 3/8"-16 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $115.22 – $243.77 | |
| 3/8"-16 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $115.22 – $243.77 | |
| 5/16-18 MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $64.72 – $103.41 | |
| 5/16-18 MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $64.72 – $103.41 | |
| 5/16-18 STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100 each.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $95.48 – $196.69 | |
| 5/16-18 STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100 each.
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $95.48 – $196.69 | |
| 5/8-11" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $114.88 – $235.16 | |
| 5/8-11" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $114.88 – $235.16 | |
| 5/8-11" STAINLESS STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $237.92 – $600.98 | |
| 5/8-11" STAINLESS STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $237.92 – $600.98 | |
| 5/8" DEFORMED BAR (DBA) |
- Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
- Material is a low carbon steel ASTM A496
- No Thread – Full Weld Base
- Type F Ferrule Supplied
| $9.91 – $396.41 | |
| 7/8-9" MILD STEEL FULL THREAD ARC STUD |
- Sold in quantities of 100
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $242.55 – $683.55 | |
| 7/8-9" MILD STEEL PARTIAL THREAD ARC STUD |
- Sold in quantities of 100
- Pitch Ferrule is recommended for this stud.
- All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
- All Arc Studs are rolled to UNC-2A for male threads: UNC-2B for Female.
- Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
- Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
| $242.55 – $683.55 | |
| Headed Concrete Anchors | 1/4″ Headed Concrete Anchors are most commonly used on embed plates and for many other concrete connections. … | | |
| Headed Shear Connector | 3/4″ Description Unit of measure is Box except for 12″ lengths and up. For quantity … | | |
