Contact Us

Thanks for visiting Stud Welding & Fastners. If you have any questions on a product or service, please contact us and a member of our team will respond in a timely manner.
800-936-1948

    ImageNameSummaryPriceBuy
    RAPID FERRULE DISPENSER
    • This tool allows the workers to remain standing while placing ferrule
    • Reduces Fatigue
    • Ergonomic – No need to bend over to position studs
    • Ability to dispense ferrules up to four feet away from the body
    • Ferrule poles available for 3/4″ TD Ferrules and 7/8″ Flat Ferrules
    • To be used with Rapid Ferrules
    $550.00$605.00
    RAPID FERRULES
    • These ferrules are used with the Rapid Ferrule Pole and it allows the workers to remain standing while positioning the ferrules in place.
    • Ability to dispense ferrules up to four feet away from the body
    • Rapid Ferrule Pole and Rapid Ferrules available for 3/4″ TD Ferrules and 7/8″ Flat Ferrules
    • Eric Elrod Says: “I wouldn’t do a job without them!”
    $70.13$82.50
    SJ-205-T4 MOBILE STUD WELDING GENERATOR SYSTEM
    • SJ-205-T4 (Tier 4) Mobile Stud Welding Generator System
    • 205 kw Generator System
    • TW6900 Single Gun or TW6902 Dual Gun Stud Welder
    • 1 or 2 Heavy Duty Stud Welding Guns with Thru-Deck Accessories
    • 2 ea 50′ Ground Cables
    • 300′ of Combo Cable (Lead Cable)
    • For Delivery Within 500 Miles Add $1.25/Mile.  Over 500 Miles, Ask For Shipping Options.

     

    Our jobsite division uses this genset every day in the field.  If you are going to buy one, why not buy from the experts?!

    Watch the Demonstration Video

    $131,000.00$144,000.00
    STUD GUN - HEAVY DUTY
    • A Service Rep will contact you after you place your order to ensure the gun is set up for your welder and your application.
    • Ergonomic Design
    • Welding Range – 1/8″ thru 1 1/4″ Diameter Studs
    • 5.2 lbs Excluding Weld Cable
    • Configured to Operate with your Stud Welder.

     

    The TWE 17000 by Tru-Weld Equipment has been designed to fit comfortably for all hands, including when wearing a work glove. The neck of the handle has been tapered so that when grasped, the trigger can be accessed easily, without any unnecessary strain. The handle length allows for better balance of the stud gun and it keeps the welding cable and connector away from your hand, minimizing operator fatigue.

     

    The TWE17000 heavy duty stud gun has a welding range from 1/8” through 1-1/4” diameter studs.

     

    The TWE17000 is approximately 10.0″ long from the weld cable to the back cap, and approximately 7″ long from the top of the stud gun to the bottom of the handle. The overall weight of the gun is approximately 5.2 lbs., excluding 8.5 feet of 4/0 weld cable and 8 feet of control cable (this also excludes all connectors, legs, and foot piece).

     

    The TWE17000 can be ordered to operate with any type of stud welding equipment. Simply specify the make and model of your equipment and we will provide you with a stud gun connection that is compatible with your unit, regardless of the manufacturer.

    $2,700.00
    STUD WELDING CABLE/COMBO CABLE
    • 4/0 Toughflex EPDM
    • 16/4 Control Cable
    • Phoenix Connectors Include Strain Relief
    $495.00$825.00
    TW4300 Drawn ARC Stud Welder - 1/2" Max Stud Diameter
    • Adjustable weld time, weld current, gas purge time for a wide range of process control.
    • Supervisor lockout by key so settings isn’t changed.
    • Great short cycle performance on thick and thin base materials.
    • Two-handle lift for practical portability.
    • Stud Job Counter that can be reset for every job.
    • The TW4300 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding. The TW4300 contains digital controls for weld time, weld current, and gas purge time. The system was designed to be a perfect fit for shop and shipboard use, welding up to 1/2″ studs. This is all contained in a compact, portable package.

     

    TW4300 Manual

     

    Included with Complete System:

    800 Amp Power Supply Controller, TWE19000 Light Duty stud gun, 25 feet of #1 AWG combo cable, and 15 feet of #1 AWG ground cable with clamp.A17

    $9,650.00
    TW4400 Drawn ARC Stud Welder - 5/8" Max Stud Diameter

    The TW4400 is a fully integrated stud welding system for ferrule-shielded and gas-shielded drawn arc stud welding processes. The TW4400 contains digital controls for weld time, weld current, and gas purge time. The system was designed to be an ideal fit for shop use, weld up to 5/8″ diameter threaded studs.  This is all contained in a compact, portable package.

    NEW  PRO-TECH’D technology protects the gun circuitry

    NEW  Improved user interface for more intuitive setup

    NEW  Factory presets and user customizable presets

    NEW  Improved weld control

     

    TW4400 Manual

    TW4400 Fyler

     

    Features/Included

    • TW4400 Power supply, TWE19000 Light-Duty stud gun, 25 feet of #1AWG combo cable and 15 feet of #1AWG ground cable with clamp

     

    TW4400 Specifications

    Size/Dimension:
    Height 12.6” (320mm)
    Width 11” (280mm)
    Length 22.4″ (570mm)
    Weight:
    126 lbs (57 Kg)
    Weld Range:
    1/8″ to 5/8″ diameter
    Duty Cycle:
    1/8” through 1/4″ – unlimited
    3/8″ – 7 to 8 per minute
    1/2″ – 4 to 5 per minute
    5/8″ – 2 to 3 per minute
    Input Voltage:
    230 / 460 VAC 3 Phase 60Hz
    Fusing Requirement:
    (slow acting) 230/50 Amps
    460/25 Amps
    $10,000.00
    TW5600 DRAWN ARC STUD WELDER- 3/4" MAX STUD DIAMETER
    • TW5600 Stud Welding System – Fully-Integrated Shop Stud Welding System
    • (3/4” Max Stud Diameter)

     

    TW5600 Manual

     

    Included with Complete System:

    • 1600 Amp Power supply Controller
    • TWE17000 Heavy Duty stud gun
    • 35 feet of 4/0 weld and control cable and 25 feet of 4/0 ground cable w/ HD clamp
    • The TW5600 is a fully integrated stud welding system with two digital controls for time and current. The system was designed to be a perfect fit for shop use, excelling at small to medium/large diameter studs. This is all contained in a compact, affordable package.
    $11,400.00$13,900.00
    TW5700 DRAWN ARC STUD WELDER - 7/8" MAX STUD DIAMETER
    • TW5700 Stud Welding System – Fully-Integrated Shop Stud Welding System
    • (7/8” Max Stud Diameter)

     

    TW5700 Manual

     

    Included with Complete System:

    • 1900 Amp Power supply Controller
    • TWE17000 Heavy Duty stud gun
    • 50 feet of 4/0 weld and control cable
    • 25 feet of 4/0 ground cable w/ HD clamp
    • The TW5700 is a fully integrated stud welding system with two digital controls for time and current. The system was designed to be a perfect fit for shop use, excelling at small to large diameter studs. This is all contained in a compact, affordable package.
    $12,500.00$15,000.00
    TW6800 - 1" MAX STUD DIAMETER
    • TW6800 Single Gun Stud Welding System
    • Heavy Duty Steel-Fabrication Shop Stud Welding System
    • (1/4″ – 1″ Diameter)

     

    TW6800 Manual

     

    Included with Complete System:

    • Power supply controller, one (1) TWE17000 heavy duty stud gun, one (1) set of 50ft of 4/0 weld and control cable, and one 25ft of 4/0 ground cable w/ HD clamp.
    • The TW6800 is a fully integrated single-gun stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs.
    $16,100.00$18,570.00
    TW6802 - DUAL GUN - 1" MAX STUD DIAMETER
    • TW6802 Dual-Gun Stud Welding System
    • Heavy Duty Steel-Fabrication Shop Stud Welding System
    • (1/4″ – 1″ Diameter)

     

    TW6802 Manual

     

    Included:

    • Power supply controller, two (2) TWE17000 heavy duty stud guns, two (2) sets of 50ft of 4/0 weld and control cable, and two (2) sets of 25ft of 4/0 ground cable w/ HD clamp.
    • The TW6802 is a fully integrated dual-gun stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs.
    $18,800.00$23,800.00
    TW6900- 1 1/4" MAX STUD DIAMETER
    • TW6900 Stud Welding System
    • (1 1/4” Max Stud Diameter)

     

    TW6900 Manual

     

    Included:

    • 3000 amp power supply.  Complete System Includes one (1) TWE17000 Heavy Duty stud guns, 150′ of 4/0 Combo Cables and two (2) 50′ 4/0 ground cables w/ HD clamps.
    • The TW6900 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications (this also includes G90 decking.)
    $17,650.00$20,150.00
    TW6902 - DUAL GUN - 1 1/4" MAX STUD DIAMETER
    • Smooth arc curve allows for the wide range of welding.
    • Enhanced duty cycle for production requirements.
    • Powerful output for even the largest diameter jobs.
    • Stepless time and current control allow for infinite settings for fine tuning the welding output.
    • Safety welding interlock.  Keeps system from double triggering and saves on chuck wear.
    • Stud Job counter which can be reset per job.

     

    TW6902 Manual

     

    Dimensions:

    • Height 28” (736.6mm)
    • Width 29” (711.2mm)
    • Length 36” (914.4mm)
    • Weight 865 lbs (398Kg)

     

    Weld Range:

    • 1/4” to 1-1/4” diameter
    • Duty Cycle:
    • 1/4” through 5/8″ – unlimited
    • 3/4″ – 22 to 24 per minute
    • 7/8” – 16 to 18 per minute
    • 1” – 12 to 14 per minute
    • 1-1/4” – 4 to 5 per minute

     

    Included with Complete System:

    • 3000 amp power supply.
    • Two (2) TWE17000 Heavy Duty stud guns.
    • 300′ of 4/0 Combo Cables.
    • Two (2) 50′ 4/0 ground cables w/ HD clamps.

     

    The TW6902 is a fully-integrated, dual-gun, stud welding system with two digital controls for time and current. The system was designed to meet the most challenging stud welding jobs to include weld thru-deck applications.

    $20,900.00$25,900.00