Contact Us

Thanks for visiting Stud Welding & Fastners. If you have any questions on a product or service, please contact us and a member of our team will respond in a timely manner.
800-936-1948

ARC STUDS

ImageNameSummaryPriceBuy
1" DIAMETER HEADED SHEAR CONNECTOR
  • Ferrules – Click Here for help with ferrule selection and Click Here for ferrule specifications.  All ARC Weld Studs are supplied with the correct ferrule for your application.  If you do not see the option you are looking for, select other when ordering and we’ll call to discuss your application.
  • Unit of measure is Box except for 11 1/4″ lengths and up.  For quantity discounts or you don’t see the size you need, just give us a call at 800-936-1948!
  • 1″ Diameter Headed Studs are most commonly used on bridge girders and embed plates.
  • 1″ Diameter studs that are shot straight to steel will burn off 1/4″.
  • Headed Shear Connectors come in diameters of 3/4″, 7/8″, 1″ and 1 1/4″.  They are made of low carbon steel, ASTM A29, 1010-1020.
  • Ferrule types are F (Standard Duty), C (Collar Stud), FHD (Heavy Duty) TD (Thru Deck), P (Pitch Diameter Stud), R (reduced Base) FHDS (Heavy Duty Special) V (Vertical)& A (Angle Ferrule)
$8.34$503.34
1"-8 MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1"-8 MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • 1″ Diamter Arc Studs are reduced approximately 1/4″ in length after welding.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$374.85$760.73
1/2-13" MILD STEEL FULL THREAD ARC STUDS
  • Sold in quantities of 100 each.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$118.61$393.75
1/2-13" MILD STEEL PARTIAL THREAD ARC STUDS
  • Sold in quantities of 100 each.
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$88.64$136.71
1/2-13" STAINLESS STEEL FULL THREAD ARC STUDS
  • Sold in quantities of 100 each.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$156.45$375.00
1/2-13" STAINLESS STEEL PARTIAL THREAD ARC STUDS
  • Sold in quantities of 100 each.
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$164.27$395.61
1/2" DBA - DEFORMED BAR ANCHORS
  • Deformed Bar Anchors are designed for weld and bearing plates in concrete connections.
  • Material is a low carbon steel ASTM A496
  • No Thread – Full Weld Base
  • Type F Ferrule Supplied
$132.64$719.77
1/2" HEADED CONCRETE ANCHORS
  • 1/2″ Headed Concrete Anchors are most commonly used on embed plates and for composite applications at bent plate/pour stop to anchor the building’s edge to the concrete.  They can be welded to a flat surface or to the inside or outside of an angle.
  • For 3/4″ thru 1″ Diameters, see Headed Shear Connectors.
  • Ferrules – All ARC Weld Studs are supplied with the correct ferrule for your application. If you do not see the ferrule that fits your application select “other” then after you check out we will contact you or you can give us a call at (800) 936-1948 or email us.  We’ll then help you decide what ferrule you’ll need for your application.
  • Ferrule types are F (Standard Duty), C (Collar Stud), FHD (Heavy Duty) TD (Thru Deck), P (Pitch Diameter Stud), R (reduced Base) FHDS (Heavy Duty Special) V (Vertical)& A (Angle Ferrule)
  • Click here for shipping weights and box qtys
$0.00$361.66
1/4-20 MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100 each
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$47.85$72.32
1/4-20 MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100 each
  • Pitch Ferrules are recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$47.85$72.32
1/4-20 STAINLESS STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100 each
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$78.82$137.37
1/4-20 STAINLESS STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100 each
  • Pitch Ferrules are recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$51.96$137.37
1/4" HEADED CONCRETE ANCHORS
  • 1/4″ Headed Concrete Anchors are most commonly used on embed plates and for many other concrete connections.  They can be welded to a flat surface or to the inside or outside of an angle.
  • Ferrules – All ARC Weld Studs are supplied with the correct ferrule for your application, if you do not see the option you are looking for, select other can call for exact type.
  • Ferrule types are F (Standard Duty), C (Collar Stud), FHD (Heavy Duty) TD (Thru Deck), P (Pitch Diameter Stud), R (reduced Base) FHDS (Heavy Duty Special) V (Vertical)& A (Angle Ferrule)
  • Click here for shipping weights and box qtys
$329.85$729.40
3/4-10" MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" MILD STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$150.94$330.75
3/4-10" STAINLESS STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.46$947.82
3/4-10" STAINLESS STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.46$947.82
3/4-10" STAINLESS STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.46$947.82
3/4-10" STAINLESS STEEL FULL THREAD ARC STUD
  • Sold in quantities of 100
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.46$947.82
3/4-10" STAINLESS STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.47$947.82
3/4-10" STAINLESS STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.47$947.82
3/4-10" STAINLESS STEEL PARTIAL THREAD ARC STUD
  • Sold in quantities of 100
  • Pitch Ferrule is recommended for this stud.
  • All Arc Studs and Pins are reduced approximately 1/8″ in length after welding for diameters up to 1/2″ weld base diameter and approximately 3/16″ for 5/8″ weld base diameter studs and larger.
  • All Arc Studs are rolled to UNC-2A for male threads:  UNC-2B for Female.
  • Studs of 3/16″ dia. and larger are loaded with solid flux which is accurately positioned to .010 of center
  • Arc Ferrules are provided for all Arc Studs and Pins as an integral component of the specific fastener required.
$367.47$947.82